![]() Once this nut has been removed, you can slide off the end of the Accord shift cable. Remove the nut that holds the shaft of your shifter base in place. When you are ready to learn how to adjust a Honda Accord shift cable, slide the shifter into the PARK position. Now that the center console has been removed, inspect your shift cable and how it mounts to the shift lever mechanism.Ĭlear out any wiring and get yourself some room to operate, as you’ll be removing the lead of the shift cable in order to adjust it. Pull your emergency brake all the way up and then remove your center console. You should now be able to unscrew the center console light bulb, as well as any electrical connections your Honda Accord may have. Slide your passenger and driver seat all the way forward, and then remove the screws shown below to free the back of your console. You will need to loosen the screws around the shifter base area, and the two screws located in the back of the center console. Once the shifter base has been taken off, you almost have your Accord center console removed. Remove these two screws and then you can remove the shifter base around your shifter. Now remove the screws shown above that retain the center console pocket in place. This blade or edge must ride along the outside of the plastic button that resides inside the head of your Honda shifter. If you are removing it just in case, make sure to note the orientation in which you are removing the blade. You can choose to leave the shifter internals in place, which we opted to do. There are two phillips screws that hold the head of your Accord shifter in place.Īfter removing these screws, pull up carefully to remove the shifter. To do this, your automatic shifter handle must be removed. ![]() Before you learn how to adjust a Honda Accord shift cable, you’ll need to remove the center console to your Accord. Removing your Honda Accord shifter can be very easy to do, and requires just a Phillips screwdriver and a panel popping device, you can even use a spatula. ![]() Because this cable runs into the back of your automatic transmission, you will need to replace that end first and slide the linkage part into your Accord cabin. The shift cable is housed in a metal casing, which allows for the cable to slide back and forth within the protective sheath. This DIY guide assumes you are comfortable working on the interior of your own vehicle, and that you have a flat surface to work upon. In any case, I’ll be showing you how to adjust a Honda Accord shift cable in a 2000 Honda Accord with the 2.3 liter F23A4 engine in it. Knowing how to adjust a Honda Accord shift cable can come in handy when you are installing a new transmission, or servicing your shift interlock, or maybe the shift cable is damaged. Because the automatic transmission in your SOHC Honda Accord is actuated by a cable, it’s a good idea to know how to adjust a Honda Accord shift cable. Problems with your Honda Accord shifter can be irritating at best, and downright dangerous at worst.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |